HF Series - Compressed Air Filters

HF Series – Compressed Air Filters

A typical compressed air system is contaminated with abrasive solid particles such as dust, dirt, rust and pipe scale, compressor lubricants (mineral or synthetic), condensed water droplets and acidic condensates and oil and hydrocarbon vapors. If not removed, these contaminants increase pneumatic equipment maintenance costs, lead to instrument and control failure, contribute to poor product fit and finish and contaminate processes.

The right Hankison filter or filter system will remove these contaminants allowing your compressed air system to deliver the quality of air required by your application; whether it’s plant air, instrument air, or medical airhelping to ensure consistent output quality while minimizing operating costs.

A choice of Seven Element Grades allows you to design a system that delivers the air quality you require:

  • Grade 11 – Moisture Separator
  • Grade 9 – Separator/Filter
  • Grade 7 – General Purpose Air Line Filter
  • Grade 6 – Dry Particulate Air Line Filter
  • Grade 5 – High-Efficiency Oil Removal Filter
  • Grade 3 – Ultra High-Efficiency Oil Removal Filter
  • Grade 1 – Oil Vapor Removal Filter

HF Series Filters feature:

  • Push-on elements make element replacement easy
  • Piston type element to housing seal keeps unfiltered air from by-passing element
  • Corrosion-resistant cores-Stainless steel for added structural integrity
  • Low resistance to flow-Seam welded for extra strength
  • «Matrix blended fiber» media-large, effective surface area -improves capture rate
  • Ensures high efficiencies-large open area minimizes pressure drop
  • Coated, closed-cell foam sleeve – resists chemical attack from oils and acids
  • Ensures high efficiencies by preventing re-entrainment of coalesced liquids
  • Chemically resistant end caps bound to media with specially formulated adhesive
  • Silicone free
  • Withstands temperatures to 150°F (66°C)
  • Low resistance to flow
Categoría:

Descripción

MODEL Capacity @ 100 psig
(6.7 barg)		 Connections Replacement
Element
scfm nm3/h inches Model Qty.
Modular Type Housing
HF (Grade)-12-(Conn.)-(Features)2 20 34 3/8″ or 1/2″ NPT E (Grade)-12 1
HF (Grade)-16-(Conn.)-(Features)2 35 60 3/8″ or 1/2″ NPT E (Grade)-16 1
HF (Grade)-20-(Conn.)-(Features)2 60 102 3/8″ or 1/2″ NPT E (Grade)-20 1
HF (Grade)-24-(Conn.)-(Features)2 100 170 3/4″ or 1″ NPT E (Grade)-24 1
HF (Grade)-28-(Conn.)-(Features)2 170 289 3/4″ or 1″ NPT E (Grade)-28 1
HF (Grade)-32-(Conn.)-(Features)1 2 250 425 1″, 1-1/4″ or 1-1/2″ NPT E (Grade)-32 1
HF (Grade)-36-(Conn.)-(Features)1 2 375 637 1″, 1-1/4″ or 1-1/2″ NPT E (Grade)-36 1
HF (Grade)-40-(Conn.)-(Features)1 2 485 824 2″ or 2-1/2″ NPT E (Grade)-40 1
HF (Grade)-44-(Conn.)-(Features)1 2 625 1062 2-1/2″ NPT E (Grade)-44 1
HF (Grade)-48-(Conn.)-(Features)1 2 780 1325 2-1/2″ NPT E (Grade)-48 1
ASME Pressure Vessels
HF (Grade)-52-(Conn.)-(Features)1 625 1062 3″ NPT E (Grade)-PV 1
HF (Grade)-54-(Conn.)-(Features)1 1000 1699 3″ NPT E (Grade)-54 2
HF (Grade)-56-(Conn.)-(Features) 1250 2124 3″ NPT E (Grade)-PV 2
HF (Grade)-60-(Conn.)-(Features) 1875 3186 3″ NPT E (Grade)-PV 3
HF (Grade)-64-(Conn.)-(Features) 2500 4248 4″ FLG E (Grade)-PV 4
HF (Grade)-68-(Conn.)-(Features) 3125 5309 4″ FLG E (Grade)-PV 5
HF (Grade)-72-(Conn.)-(Features) 5000 8495 4″ FLG E (Grade)-PV 8
HF (Grade)-76-(Conn.)-(Features) 6875 11681 4″ FLG E (Grade)-PV 11
HF (Grade)-80-(Conn.)-(Features) 8750 14866 4″ FLG E (Grade)-PV 14
HF (Grade)-84-(Conn.)-(Features) 11875 20176 4″ FLG E (Grade)-PV 19
HF (Grade)-88-(Conn.)-(Features) 16250 27609 4″ FLG E (Grade)-PV 26
HF (Grade)-92-(Conn.)-(Features) 21250 36104 4″ FLG E (Grade)-PV 34

1 Drain plugs standard. Externally mounted automatic drains are available.
2 Time-based Filter Monitor recommended.

 

Productos relacionados