HBP Series – Blower Purge Regenerative Desiccant Dryers

DRYERS – COMPRESSED AIR / DESICCANT COMPRESSED AIR DRYERS

HBP Series blower purge regenerative dryers are economical & reliable

Categoría:

Descripción

Theory of Operation

 

Filtered compressed air enters on-line desiccant-filled, drying Tower 1 through valve (A). Up-flow drying enables the desiccant to strip moisture from the air stream. Clean, dry compressed air exits through (E) to feed the air system. Tower 2 (shown in regeneration mode) with valve (B) closed, depressurizes to atmosphere through muffler (C). Valves (D & F) open and the heater turns on. The high-efficiency blower draws ambient air and feeds it through the heater. The ambient airstream passes through valve (F) and flows downward through the moist desiccant in Tower 2, collecting water vapor before exiting valve (D). Once the desiccant is fully desorbed, the heater turns off. Valves (F & D) close and Tower 2 is repressurized. At a fixed time interval, valve (B) will open and Tower 2 will be placed on-line to dry the airstream and valve (A) will close. Operations will switch and Tower 1 will be regenerated.

 

MODEL INLET FLOW
@ 100 PSI
100°F 1
BLOWER HEATER
RATED
OUTPUT
FULL LOAD
(AVERAGE)
INLET/OUTLET
CONNECTIONS
HF SERIES
PREFILTER
HTA SERIES
AFTERFILTER
SCFM KW KW KW IN (RECOMMENDED)
HBP500 500 1.6 10 10 2″ NPT HF5-44-20-DG HTA600
HBP600 600 2.5 12 12 2″ NPT HF5-44-20-DG HTA600
HBP750 750 2.2 14 14 3″ FLG HF5-48-20-DG HTA1200
HBP900 900 2.0 16 16 3″ FLG HF5-54-24-G HTA1200
HBP1050 1050 2.8 19 19 3″ FLG HF5-56-24-G HTA1200
HBP1300 1300 5.3 23 25 3″ FLG HF5-60-24-G HTA1800
HBP1500 1500 7.5 28 32 3″ FLG HF5-60-24-G HTA1800
HBP1800 1800 7.0 32 35 3″ FLG HF5-60-24-G HTA1800
HBP2200 2200 5.6 39 41 4″ FLG HF5-64-4F-G HTA2400
HBP2600 2600 10.3 45 50 4″ FLG HF5-68-4F-G HTA3000
HBP3200 3200 2.8 53 52 6″ FLG HF5-72-6F-G HTA4800
HBP3600 3600 4.0 58 59 6″ FLG HF5-72-6F-G HTA4800
HBP4300 4300 4.4 70 70 6″ FLG HF5-72-6F-G HTA4800

1 Performance data per CAGI Standard ADF 200 for Desiccant Compressed Air Dryer. Rating conditions are 100°F (37.8°C) inlet 100 psig (6.9 bar) inlet pressure, 100% relative humidity, 100°F (37.8°C) ambient temperature, and 5 psi (0.35 bar) pressure drop.
* Consult factory for larger models.