HCD Series - Heat of Compression Desiccant Air Dryers

HCD Series – Heat of Compression Desiccant Air Dryers

Where Ideas Meet Industry
The Hankison HCD Series provides a cost effective solution to remove moisture from compressed air. The sustainable energy saving design reduces operating costs and delivers instrument quality air.

Thermal energy generated during the air compression process is effectively utilized to regenerate the off-line desiccant bed. Ideally suited for oil-free air compressors, HCD series dryers turn «waste heat» into energy savings.

Advantages:

  • Consumes under 50 watts, less than the power requirement of a typical lap-top computer
  • Offers the lowest cost of operation as compared to conventional dehydration technology
  • Delivers ISO 8573.1: 2010 Air Quality 2 to 4 (-40°F to +37°F)
  • Fully packaged, skid mounted design, provides ease of installation
Categoría:

Descripción

MODEL RATE
FLOW 1		 INLET/OUTLET
CONNECTIONS		 COOLING
WATER
FLOW
SCFM NM3/H IN GPM @ 85°F
HCD350 350 560 2 x 3” NPT 8.7
HCD450 450 720 2 x 3” NPT 11.0
HCD600 600 960 3” FLG x 3” NPT 15.0
HCD800 800 1280 3” FLG x 3” NPT 20.0
HCD1025 1025 1640 3” FLG x 3” NPT 26.0
HCD1300 1300 2080 4” FLG 32.0
HCD1500 1500 2400 4” FLG 37.0
HCD1800 1800 2880 4” FLG 45.0
HCD2100 2100 3360 4” FLG 52.0
HCD2400 2400 3840 4” FLG 60.0
HCD3250 3250 5200 6” FLG 81.0
HCD3700 3700 5920 6” FLG 92.0
HCD4425 4425 7080
HCD5000 5000 8000
HCD6100 6100 9760
HCD7500 7500 12000
HCD8500 8500 13600
HCD10000 10000 16000

1 Flow ratings based on 100 psig operating pressure; 85°F cooling water; 95°F air temperature into drying tower.
2 Shipping weight includes factory mounted 1.0 micron after-filter.

Productos relacionados